Canon VK-16 Setting Manual page 26

Configuring the Storage Server
●
Enter the Storage Server Proxy Address
For more information on proxy server usage, ask your System administrator.
●
Enter Recorded Video Settings
Low disk space warning level - Enter a percent value. When remaining space
3
reaches, for example, 10%, a notification will be emailed (
Reduce recording frame rate when disk is under high load - When disk is highly
4
loaded, recording frame rate is temporarily reduced to prevent the recording from
stopped. Refer to "Administrator's Manual" for details.
Tip
26
When Reduce recording frame rate when disk is under high load
is ticked, you will receive an event notification such as
"Recording rate (<rate before change> → <rate after change> %)".
Ex. "Recording rate (100.0 → 90.0 %)"
If the Storage Server needs to access
Camera Servers outside the LAN, you
may need to configure proxy settings.
* See "When using a proxy server" (→ P. 14).
In the Storage Server Proxy field,
1
tick the Enable the following
proxy server box.
Enter the Proxy server address
2
and Port.
Maximum retained history -
1
Tick the Maximum retained
history option and enter a value
from 1 to 999 and then select
Days or Weeks from the drop-
down menu.
Maximum file size/duration -
2
Tick the Maximum file size/
duration option, enter a value,
and select MB or Hours. You can
enter 32 - 1024 for MB and 1 - 24
for Hours. This will establish the
maximum size used for each file of
recorded video. If you do not enter
a value, 1024 MB or 24 hours is
used for the Maximum file
size/duration value.
→
P. 32).