Canon DP-V2420 Instruction Manual page 42

Item
HDR Range
42 OSD Menu
Setting Options (underline indicates factory default)
Sets the display method when Gamma for HDR display is selected.
Canon Log (HDR): Sets the "Canon Log" dynamic range to be displayed, from 0 to 800%. (in 100
increments)
100 to 800
Canon Log 2 (HDR): Sets the "Canon Log 2" dynamic range to be displayed, from 0 to 1600%. (in
100 increments)
100 to 1600
Canon Log 3 (HDR): Sets the "Canon Log 3" dynamic range to be displayed, from 0 to 1600%. (in
100 increments)
100 to 1600
SMPTE ST 2084: Sets the "SMPTE ST 2084" dynamic range to be displayed, from 0.005 to 10,000
nit. (in 100 increments)
100 to 10000 (1000)
Hybrid Log-Gamma Y/RGB: Sets how far to display the "Hybrid Log-Gamma" dynamic range. (100
 Setting procedures
The procedures below use Canon Log 2 (HDR) as an example.
When the maximum value (1600) is specified, the 1600% dynamic range of Canon Log 2 is assigned
to the dynamic range of the video display. Although the brightness in appearance lowers, you can
check the dynamic range included in video signals. When "1200" is specified, the part exceeding
1200% of Canon Log 2 is clipped (gradation is saturated) and the part up to 1200% is assigned to
the dynamic range of the video display.
The brightness of the video display corresponds to the value set for Contrast.
Canon Log 2 (HDR): Set to "1600"
Canon Log 2
range
Gradation is reproduced by assigning
1600% the range to the range of the
1200%
to 1000 in increments of 100)
The upper limit value will change to match the settings of "Hybrid
Log-Gamma System". (
Hybrid Log-Gamma Y: 100 to 1000/2000/4000
Hybrid Log-Gamma RGB: 100 to 1000/2000
Canon Log 2 1600% signal
(Contrast: "12000")
Canon Log 2
DP-V2420
range
range
DP-V2420 (which
lowers the
brightness).
45)
Canon Log 2 (HDR): Set to "1200"
DP-V2420
range
1600%
Clip (Saturates gradation.)
1200%
1200%
Brightness
value
corresponding
to the contrast
setting