GE Multilin G650 Manual page 161

5.2 PRODUCT SETUP
5.2.6.3 DEMAND FUNCTION MEASURES AND STATES
Demand values are available at Actual > Metering > Primary Values > Demand.
Table 5–18: DEMAND MEASURES
5
Demand measurements for current values are as follows:
DEMAND IX
DEMAND IX MAX
DEMAND IX DATE
Being X the phase considered in each case.
Demand measurements for power values are as follows:
DEMAND Y
DEMAND Y MAX
DEMAND Y DATE
Being Y the power considered in each case.
5-18
NAME DEFAULT VALUE
DEMAND IA 0.000
DEMAND IA MAX 0.000
DEMAND IA DATE 01-Jan-2000 00:00:00.000
DEMAND IB 0.000
DEMAND IB MAX 0.000
DEMAND IB DATE 01-Jan-2000 00:00:00.000
DEMAND IC 0.000
DEMAND IC MAX 0.000
DEMAND IC DATE 01-Jan-2000 00:00:00.000
DEMAND IG 0.000
DEMAND IG MAX 0.000
DEMAND IG DATE 01-Jan-2000 00:00:00.000
DEMAND ISG 0.000
DEMAND ISG MAX 0.000
DEMAND ISG DATE 01-Jan-2000 00:00:00.000
DEMAND I2 0.000
DEMAND I2 MAX 0.000
DEMAND I2 DATE 01-Jan-2000 00:00:00.000
DEMAND W 0.000
DEMAND W MAX 0.000
DEMAND W DATE 01-Jan-2000 00:00:00.000
DEMAND VAR PWR 0.000
DEMAND VAR MAX 0.000
DEMAND VAR DATE 01-Jan-2000 00:00:00.000
DEMAND VA PWR 0.000
DEMAND VA MAX 0.000
DEMAND VA DATE 01-Jan-2000 00:00:00.000
This is the demanded value every minute or every integration period, depending on the
selected settings.
Demanded maximeter; it stores the Maximum demand value until a demand reset is
issued.
Date of the Maximum demand value
This is the demanded value every minute or every integration period, depending on the
selected settings
Demanded maximeter; it stores the Maximum demand value until a demand reset is
issued.
Date of the Maximum demand value.
G650 Generator Protection & Control System
5 SETTINGS
STEP
KA
KA
KA
KA
KA
KA
KA
KA
KA
KA
KA
KA
MW
MW
MVAr
MVAr
MVA
MVA
GEK-113285A