Siemens Ag, 2002. All Rights Reserved - Siemens SINUMERIK 840DE Operation & Programming Manual

0
08.02
Structure of the
document
Warnings
© Siemens AG, 2002. All rights reserved
SINUMERIK 840D/810D Operator's Guide ManualTurn (BAM) – 08.02 Edition
This can result in unforeseen dangers for:
• the health and life of people,
• the control, machine and other property of the operating company
and user.
The following information blocks marked by symbols are used in this
document:
Function
Sequence of operations
Explanation of parameters
Additional notices
Software option
The function described is a software option, i.e. the function is only
executable on the control if you have acquired that option.
The following five warnings are used with graded severity.
Danger
Indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury or in substantial property damage.
Warning
Indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injury or in substantial property damage.
Caution
Used with the safety alert symbol indicates a potentially hazardous
situation which, if not avoided, may result in minor or moderate injury
or in property damage.
0
Preface
0-11