Panasonic DX-600 Service Manual page 313

No. Parameter
17 RECEIVE MODE
18 OPERATOR CALL
TIMER
19 OGM LENGTH
(TAM I/F)
20 SILENT DETECTION
(TAM I/F)
22 SUBSTITUTE RCV
23 RECORDING PAPER
SIZE
24 PRINT REDUCTION
25 REDUCTION RATIO
26 POLLING
PASSWORD
27 POLLED FILE SAVE
28 STAMP AT MEM.
XMT
Edition 1.0
Setting
Setting
Number
1 TEL
*2 FAX
3 FAX/TEL
SW.
4 TAM/FAX
*1 20
sec.
2 30
sec.
3 40
sec.
4 50
sec.
1 1
sec.
--- ---
60 60
sec.
1 Invalid
*2 Valid
1 Invalid
*2 Valid
1 A4
*2 Letter
3 Legal
1 Fixed
*2 Auto
70 70%
---- ----
*100 100%
(----) Setting a 4-digit password for secured polling.
*1 Invalid
2 Valid
1 Invalid
*2 Valid
313
Setting the receive mode.
Selecting the length of time that your machine signals
(rings) for an incoming voice call in Fax/Tel Auto
Switching mode.
Setting for the OGM length of your TAM from 1 to 60
seconds. The machine will not start to detect
SILENCE until the time setting has lapsed.
(Default = 20 sec.)
Selecting the Silent Detection Mode.
Selecting whether the machine receives to memory
when recording paper runs out, toner runs out or
recording paper is jammed.
Setting the recording paper size installed in your
machine.
Selecting print reduction mode.
Fixed:Reduce received document according to setting
of Parameter No. 25.
Auto :Reduce received document according to the
length of received documents.
Selecting fixed print reduction ratio from 70% to 100%.
This parameter functions only when fixed print
reduction is selected on Fax Parameter No. 24.
Selecting whether the machine retains the polled
document in memory even after the document is
polled once.
Selecting whether the machine stamps the original
documents when storing the documents into memory.
(Depending on the Stamp setting on the Control
Panel)
Comments
DX-600/800
APR 2002