Panasonic DX-600 Service Manual page 29

2.2.7. Transmit Motor (324)
(3)
(5)
Edition 1.0
(1) Remove the Transmit Guide (301) Assembly
(Refer to 2.2.4.).
(2) Remove the Stamp Assembly (325, 326)
(Refer to 2.2.5.).
(3) Disconnect the Connector (1020) from the
Transmit Motor (324).
(4) Remove the ADF Gear (305) and ADF Angular
(4)
Shaft (338).
Caution:
When removing the ADF Gear, rotate the Transmit
Motor Gear by hand until the Gear Latch Hook can
be seen from the inside, under the Transmit Motor.
Push down on the Latch Hook to release the ADF
Gear.
(5) Remove 2 Screws (19).
(6)
(6) Remove the Transmit Motor (324).
Caution:
Reinstall the Transmit Motor (324) as illustrated.
Caution:
Before reassembling, apply EM-50L Grease to the
Gear Posts as illustrated.
29
DX-600/800
APR 2002