Panasonic UF-6300 Service Manual page 207

Table of Contents

Advertisement

No.
Parameter
18 OP CALL TIMER
19 OGM LENGTH
(TAM I/F)
20 SILENT
DETECTION
(TAM I/F)
22 SUBSTITUTE
RCV
23 REC. PAPER
SIZE
24 PRINT
REDUCTION
25 REDUCTION
RATIO
26 POLLING
PASSWORD
27 POLLED FILE
SAVE
28 STAMP AT MEM.
XMT
31 INC. FILE SAVE
32 COPY
REDUCTION
Setting
Setting
Number
1
20 SEC
2
30 SEC
3
40 SEC
4
50 SEC
1
1 SEC
---
---
60
60 SEC
1
INVALID
2
VALID
1
INVALID
2
VALID
1
A4
2
LETTER
3
LEGAL
1
FIXED
2
AUTO
70
70%
----
----
100
100%
(----)
1
INVALID
2
VALID
1
INVALID
2
VALID
1
INVALID
2
VALID
1
MANUAL
2
AUTO
Selecting the length of time that your machine signals
(rings) for an incoming voice call in Fax/Tel Auto
Switching mode.
Setting the OGM length of your TAM from 1 to 60
seconds.
The machine will not start to detect SILENCE until the
time setting has lapsed.
(Default = 20 sec.)
Selecting the Silent Detection Mode.
Selecting whether the machine receives to memory when
recording paper runs out, toner runs out or recording
paper is jammed.
Setting the recording paper size installed in your
machine.
Selecting print reduction mode.
Fixed : Reduce received document according to setting
of Parameter No. 25.
Auto : Reduce received document according to the
length of received documents.
Selecting fixed print reduction ratio from 70% to 100%.
This parameter functions only when fixed print reduction
is selected on Fax Parameter No. 24.
Setting a 4-digit password for secured polling.
Selecting whether the machine retains the polled
document in memory even after the document is polled
once.
Selecting whether the machine stamps the original
documents when storing the documents into memory.
(Depending on the Stamp setting on the Control Panel)
Selecting whether the machine retains the document in
the memory if the document is not successfully
transmitted.
Selecting whether the machine performs the copy
reduction ratio automatically or manually.
MANUAL: The machine will prompt you for the Zoom
ratio (100% to 70%) when making copies.
AUTO
: The machine will automatically determine the
reduction ratio according to the length of the
original document.
207
Comments

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Uf-5300Uf-6200

Table of Contents