Installation - Panasonic UF-6300 Service Manual

7 Installation

Refer to the Operating Instructions (For Facsimile).
Fax Parameter Table (AU) for reference
No. Parameter
01 CONTRAST
02 RESOLUTION
04 STAMP (HOME)
05 MEMORY
(HOME)
06 DIALING
METHOD
07 HEADER PRINT
08 HEADER
FORMAT
09 RCV'D TIME
PRINT
10 KEY/BUZZER
VOLUME
12 COMM.
JOURNAL
13 AUTO JRNL
PRINT
17 RECEIVE MODE
Setting
Setting
Number
1 NORMAL
2 LIGHTER
3 DARKER
1 STANDARD Setting the home position for the RESOLUTION.
2 FINE
3 S-FINE
4 HALFTONE
(FINE)
5 HALFTONE
(S-FINE)
1 OFF
2 ON
1 OFF
2 ON
1 PULSE
2 TONE
1 INSIDE
2 OUTSIDE
3 NO PRINT
1 LOGO, ID
NO.
2 FROM TO
1 INVALID
2 VALID
1 OFF
2 SOFT
3 LOUD
1 OFF
2 ALWAYS
3 INC. ONLY
1 INVALID
2 VALID
1 TEL
2 FAX
3 FAX/TEL
SW.
4 TAM/FAX
Setting the home position of the CONTRAST key.
Setting the home position of the STAMP key.
To select the stamp function when document is stored in
memory, see Fax Parameter No. 28.
Setting the home position for memory transmission/copy
mode. (This setting can be temporarily changed by using
F8-9 (MEMORY XMT))
Selecting the dialing method.
Selecting the printing position of the header.
INSIDE: Inside TX copy area.
OUTSIDE : Outside TX copy area.
NO PRINT : Header is not printed.
Selecting the header format.
Selecting whether the machine prints the received date &
time, remote ID, percentage of reduction and page
number on the bottom of each received page.
Selecting the volume of the Key/Buzzer tone.
Selecting the home position of printout mode for COMM.
Journal Off/Always/INC.
OFF : Does not print
ALWAYS : Always prints
INC. ONLY : Prints only when communication has failed.
Selecting whether the machine prints the journal
automatically after every 32 transactions.
Setting the receive mode.
206
Comments