Section 3 Condition Reporting and Monitoring
Figure 15. Accessing the Diagnostics Menu
To access the Fault Report Viewer through a context menu selection within the
Operator Workplace:
1.
2.
Figure 16. Fault Report Viewer
3.
4.
3BUA000150-600
Navigate to the asset of interest in the Object Browser.
Select Fault Report Submitter from the context menu. This opens the Fault
Report (condition/subcondition) Viewer like the one shown in
The Select a CMMS Object drop-down list box shows all the CMMS
Equipment IDs configured for the selected Aspect. Click the down arrow and;
for example, select the Maximo Equipment ID for which it is desired to view
the Fault Reports.
From left to right, the columns in the Fault Report Viewer show:
–
Severity: the severity of the condition.
–
FR Status: The status of the Fault Report. It is either Pending or
Submitted.
–
TimeStamp: the time the Fault Report was generated.
Fault Report Viewer
TC07804B
Figure
16.
TC05000C
39