HP 12500 SERIES Configuration Manual page 52

Figure 19 Network diagram
XGE1/3/0/2
(IRF-port1/1)
Device A
The orange lines represent IRF links. The black lines represent Ethernet links. The gray circles represent aggregate links.
Configuration procedure
IMPORTANT:
For two neighboring IRF members, IRF links must be bound to IRF-port 1 on one member and to
IRF-port 2 on the other.
Configure Device A:
1.
# Assign member ID 1 and member priority 12 to Device A.
<Sysname> system-view
[Sysname] irf member 1
[Sysname] irf priority 12
# Bind Ten-GigabitEthernet 3/0/2 and Ten-GigabitEthernet 3/0/1 to IRF-port 1 and IRF-port 2,
respectively.
[Sysname] interface ten-gigabitethernet 3/0/2
[Sysname-Ten-GigabitEthernet3/0/2] shutdown
[Sysname-Ten-GigabitEthernet3/0/2] quit
[Sysname] irf-port 1
[Sysname-irf-port1] port group interface ten-gigabitethernet 3/0/2
[Sysname-irf-port1] quit
[Sysname] interface ten-gigabitethernet 3/0/2
[Sysname-Ten-GigabitEthernet3/0/2] undo shutdown
[Sysname-Ten-GigabitEthernet3/0/2] quit
[Sysname] interface ten-gigabitethernet 3/0/1
[Sysname-Ten-GigabitEthernet3/0/1] shutdown
XGE1/3/0/1 XGE2/3/0/1
(IRF-port1/2) (IRF-port2/1)
Device B
Device E
XGE3/3/0/2
(IRF-port3/1)
Device C
XGE2/3/0/2
(IRF-port2/2)
48
IP network
XGE4/3/0/2
(IRF-port4/2)
XGE3/3/0/1
(IRF-port3/2)
XGE4/3/0/1
(IRF-port4/1)
Device D