Displaying And Maintaining An Irf Fabric - HP 12500 SERIES Configuration Manual

Step
2. Change Device B's member ID on the standby
MPU to be the same as that of Device A.
3. Remove the damaged MPU from Device A,
and insert Device B's standby MPU into
Device A.
If each member device has only one MPU, use the following procedure:
Step
1. Save the running configuration to the
configuration file used at the next startup.
2. Insert a new MPU into any member device
working correctly, for example, Device B.
3. Copy the configuration file on Device B's
active MPU to the standby MPU.
4. Set the configuration file for next startup.
5. Change Device B's member ID on the
standby MPU to be the same as that of
Device A.
6. Remove the damaged MPU from Device A,
and insert Device B's standby MPU into
Device A.

Displaying and maintaining an IRF fabric

Execute display commands in any view.
Task
Display information about all IRF members.
Display the IRF fabric topology.
Display the IRF link information.
Display basic IRF settings.
Display MAD configuration.
Display restricted ports.
Command
•
In IRF mode:
irf chassis chassis-number slot slot-number
member member-id
•
In standalone mode:
irf slot slot-number member member-id
N/A
Command
save [ safely ] [ force ]
N/A
copy fileurl-source fileurl-dest
startup saved-configuration cfgfile
•
In IRF mode:
irf chassis chassis-number slot slot-number
member member-id
•
In standalone mode:
irf slot slot-number member member-id
N/A
Command
display irf
display irf topology
display irf link
display irf configuration
display mad [ verbose ]
display restricted port [ chassis chassis-number slot
slot-number ]
37