TRANSMISSION
SHIFT LEVER
Removal
1. Remove the shift knob cover
and shift knob
from the shift lever .
2. Remove the screws retaining the center console
using a T27 and T30 Torx driver. Remove the
console from the vehicle.
3. Remove the clip and washer retaining the shift cable
to the shift lever and disconnect the cable end from
the lever.
4. Remove the retaining ring
off the mounting bracket and out from the frame.
5. Remove both bushings
service as needed.
6.4
, retaining screw
1
and slide the shift lever
from the shift lever and
9925724 R01 - 2014-2015 RZR XP 1000 / RZR XP4 1000 Service Manual
© Copyright 2014 Polaris Industries Inc.
Installation
1. Perform the removal steps in reverse order to install
the gear shift lever (lever, cable, console, shift knob).