Starter One-Way Clutch Disassembly
1. Lift up to remove starter one-way gear.
2. Remove the three one-way clutch retaining screws.
3. Remove the one-way clutch and inspect both sides
of drive rollers
. Inspect the roller contact surface
1
inside the hub for wear, damage or uneven surface.
9925724 R01 - 2014-2015 RZR XP 1000 / RZR XP4 1000 Service Manual
4. Inspect drive surface of starter gear
© Copyright 2014 Polaris Industries Inc.
ENGINE / COOLING SYSTEM
for wear, damage or uneven surface. If any starter
one-way clutch component is worn or damaged,
replace the clutch and starter gear as an assembly.
and bushing
3
3.47