Displaying Available Memory; Sending An Entry Or Phonebook To The Handset Or System - Siemens HiPath 3000 Operating Instruction

Conducting calls – enhanced functions
Step by Step
s t
Available Memory
56

Displaying available memory

s
Open the phonebook.
s t
Select any entry.
Press the display key.
Options
[
Select the menu item and confirm. The amount of
memory used and available is displayed.
a Press the On-hook key to end the operation.
Sending an entry or phonebook to the
handset or system
You can send individual entries or the entire phonebook
to other handsets or to the communications system.
For phonebook transfer in vCard format via Bluetooth
see  page 116.
If your handset and the recipient's handset have phone
numbers between 1 and 99, you can send or receive a
list or entry directly from one handset to the other. If the
handsets' phone numbers start at 100, you must first
send the list or entry to the communications system.
The recipient can then use his or her handset to
download the list or entry from the communications
system.
Restrictions when copying over the
communications system
The entries in the handset's phonebook are stored in
vCard format  page 51. The communications system,
however, uses another format. This can cause loss of
phonebook entry information. The features that are new
for the vCard format are indicated in the table
 page 51 by "new for vCard format". The phone
numbers are not affected.
Sending a list/entry
s
Open the phonebook.
s t
Select the entry you want.
Press the display key.
Options