[Cm5B] Ip Address For Ip Trunk Point-To-Multipoint Connection - NEC UNIVERGE SV8300 Command Manual

COMMAND CODE TITLE:
5B
FUNCTION:
This command is used to assign the destination IP Address for the IP trunk Point-to-Multipoint connec-
tion.
PRECAUTION:
None
ASSIGNMENT PROCEDURE:
ST + + DE
5BYY
DATA TABLE:
Y
No. MEANING
01 Destination IP Address
for IP trunk
NOTE 1: IP Address number (00-07) is the number for specifying the IP Address of opposite office which
has plural IP Addresses, when the offices are connected with Point-to-Multipoint.
If the opposite office has plural IP Addresses, set plural IP Address numbers. If the opposite office
has only one IP Address such as SV8300, set one IP Address number.
NOTE 2: Destination IP Address of opposite IP trunk/opposite IPT (P2P CCIS) is the IP Address of opposite
SV8300 assigned by CM0B Y=0XX/1XX>00/02 or the IP Address of opposite 2400 IPX.
NOTE 3:
This command should be assigned from the leading number of 1st data (IP Address pattern No. +
IP Address No.).
IP ADDRESS FOR IP TRUNK POINT-TO-MULTIPOINT CONNECTION
1ST DATA
+ + DE
(5 digits)
1ST DATA
DATA
XXX ZZ XXX: 000-255
(IP Address Pattern No.)
ZZ: IP Address No. 00-07
2ND DATA
+ + EXE
(12 digits)
MEANING
NOTE 1
NONE
3-345
2ND DATA
DATA MEANING
0000000 Destination IP Address of
00001 opposite IP trunk/opposite
IPT (P2P CCIS)
2552552
55254
No data
NWA-033623-001 Rev.3.0
NOVEMBER/12/2008
CM5B
: Default
NOTE 2
91ch3005.fm