Acd/Ucd Group - NEC UNIVERGE SV8300 Command Manual

COMMAND CODE TITLE:
17
FUNCTION:
This command is used to define ACD (Automatic Call Distribution)/UCD (Uniform Call Distribution)
groups.
PRECAUTION:
(1) A maximum of 16 ACD/UCD groups can be assigned per system.
(2) A maximum number of 60 stations can be assigned to a ACD/UCD group.
(3) Prior to changing or deleting the station number within a ACD/UCD group, in CM17 Y=0, it is
necessary to change the data for CM17 Y=1-7 to the default.
ASSIGNMENT PROCEDURE:
ST + 17Y + DE
DATA TABLE:
Y
No. MEANING
0 Next station number
in ACD/UCD group
NOTE 1: Station numbers should be individually assigned to an ACD/UCD group, as shown below.
1st operation
2nd operation
Last operation
(STN 1-STN n: Station numbers included in a ACD/UCD group)
NOTE 2:
After data setting, lift the handset once, to activate the ACD/UCD function, at each ACD/UCD station.

ACD/UCD GROUP

STATION NUMBER (A)
+
(1-8 digits)
STATION NUMBER (A)
DATA MEANING
X Station number (A)
XXXXXXXX
STATION No. (A)
STN 1
STN 2
STN n
DATA
+ DE +
(1-8 digits)
SETTING DATA
DATA
X
XXXXXXXX
NONE
STATION No. (B)
STN 2
STN 3
STN 1
3-164
+ EXE
RELATED
COMMAND
MEANING
Station number (B) CM44 Y=00:
14XX
CM49 Y=00
No data
Continued on next page
NWA-033623-001 Rev.3.0
NOVEMBER/12/2008
CM17
: Default
91ch3002.fm