NEC Univerge SV9100 Manual page 733

44-02 : Dial Analysis Table for ARS/F-Route Access
Level:
IN
Description
Use
Program 44-02 : Dial Analysis Table for ARS/F-Route Access
selecting ARS/F-Route.
Input Data
Dial Analysis Table Number
Item
No.
01 Dial
Set the number of digits to be analyzed by the
system for ARS routing.
02 Service Type
- Service Type 1 (Extension Number)
The number goes to an extension after
deleting the front digit(s).
Additional Data
Assign the digit(s) to be deleted on top of the
number for extension number usage. At least
one digit must be deleted.
- Service Type 2 (ARS/F-Route)
The number is controlled by ARS/F-Route
table.
Additional Data:
If the ARS/F-Route Time Schedule is not
used, assign the ARS/F-Route table number
for Program 44-05.
If the ARS/F-Route Time Schedule is used,
assign the ARS/F-Route selection number for
Program 44-04.
- Service Type 3 (Dial Extension Analyze Table)
The total length of the number exceeds more
than 8 digits.
Additional Data:
Assign the Dial Extension Analysis Table
number to be used in Program 44-03.
13-138
Program 44 : ARS/F-Route Setup
Item
to set the Pre-Transaction Table for
1~120
Input Data
Up to eight digits
(Use line key 1 for a Don't
Care digit, @)
0 =No setting (None)
1 =Extension Call (Own)
2 =ARS/F-Route Table
(F-Route)
3 =Dial Extension Analyze
Table (Option)
Issue 2.0
Defaul
t
No
Setting
0
AspireNet