NEC Univerge SV9100 Manual page 441

Hide thumbs Also See for Univerge SV9100:

Table of Contents

To correct this issue another VPN connection between sites B and C is required. If

an additional VPN cannot be implemented, due to network limitations, the Peer-

to-Peer feature can be disabled in the SV8100. With Peer-to-Peer disabled, all

packets (Signaling and Voice) route through the GPZ-IPLE card. This also affects

IP phones at the REMOTE locations calling other IP phones at the same location.

Without Peer-to-Peer enabled the voice path must route to the MAIN location and

then back to the REMOTE instead of directly between the two stations on the

REMOTE network. This forces the use of additional bandwidth on the MAIN, and

REMOTE locations. Peer-to-Peer is disabled in command 15-05-50 per IP Phone.

IP Multiline Station (SIP)