Cleaning Water Inlet Strainers - Bosch Maxx 1000 Instruction Manual

Cleaning water
inlet strainers
Release the water pressure
in the supply hose
Cleaning the strainer at the
water tap
30
Downloaded from www.Manualslib.com
To avoid unused detergent from flowing into the drain
during the next wash cycle:
9. Pour approx.1 litre / 1 ¾ pt of water into
10.Select the Drain programme.
This is necessary if very little or no water flows into the
washing machine.
1. Turn off the water tap.
2. Turn the programme selector to any programme
3. Press the Start button, and allow the programme
4. Turn the programme selector to Off.
1. Disconnect the water hose for the water tap.
2. Clean the strainer with a small brush.
3. Reconnect the water hose.
manuals search engine
chamber II.
(except Spin and Drain).
to run for approx. 40 seconds.