Emulex PXE BIOS settings
Follow the procedure to enable the PXE boot settings.
1
Start the remote console, and then click Power > Power On to power on
.
a server blade.
2
When the following text is shown on the window, press Ctrl + P to go to
.
Emulex PXE BIOS menu.
3
Press Tab at three times to select Save, and select Continue, and then
.
press Enter.
4
Select Controller #* - Port #*: Bus ** Dev 00 (this port is executed
.
PXE boot), and press Enter.
BIOS settings for PXE boot
Hitachi Compute Blade 500 Series EFI User's Guide
8-3