Specifying A Server For Dhcp Clients; Configuring Option 184 Parameters For Dhcp Clients - HP FlexNetwork MSR2003 Configuration Manual

Step
2. Create a DHCP address
pool and enter its view.
3. Specify the IP address or
the name of a TFTP
server.
4. Specify the configuration
file name.
To specify the configuration file URL in a DHCP address pool:
Step
1. Enter system view.
2. Create a DHCP address pool
and enter its view.
3. Specify the URL of the
configuration file.

Specifying a server for DHCP clients

Some DHCP clients need to obtain configuration information from a server, such as a TFTP server.
You can specify the IP address of that server. The DHCP server sends the server's IP address to
DHCP clients along with other configuration information.
To specify the IP address of a server:
Step
1. Enter system view.
2. Create a DHCP address pool
and enter its view.
3. Specify the IP address of a
server.

Configuring Option 184 parameters for DHCP clients

To assign calling parameters to DHCP clients with voice service, you must configure Option 184 on
the DHCP server. For more information about Option 184, see
To configure option 184 parameters in a DHCP address pool:
Step
1. Enter system view.
2. Create a DHCP address pool and
enter its view.
Command
dhcp server ip-pool pool-name
•
Specify the IP address of the TFTP
server:
tftp-server ip-address ip-address
•
Specify the name of the TFTP server:
tftp-server domain-name
domain-name
bootfile-name bootfile-name
Command
system-view
dhcp server ip-pool pool-name
bootfile-name url
Command
system-view
dhcp server ip-pool pool-name
next-server ip-address
Command
system-view
dhcp server ip-pool
pool-name
46
Remarks
By default, no DHCP
address pool exists.
You can specify both the IP
address and name of the
TFTP server.
By default, no TFTP server
is specified.
By default, no configuration
file name is specified.
Remarks
N/A
By default, no DHCP
address pool exists.
By default, no configuration
file URL is specified.
Remarks
N/A
By default, no DHCP address
pool exists.
By default, no server is specified.
"Option 184."
Remarks
N/A
By default, no DHCP address pool
exists.