Table of Contents
Advertisement
QQ
3 7 63 1515 0
SERVICE MANUAL
Ver. 1.1 2008.05
Photo: SA-WP5000
• SA-WP5000 is the active subwoofer in HT-DDW5000/DDW7000.
• SS-CNP5000 is the center speaker in HT-DDW5000/DDW7000.
• SS-MSP5000 is the front speaker in HT-DDW5000/DDW7000.
• SS-SRP5000 is the surround/surround back speaker in HT-DDW5000/
DDW7000.
• SS-CRP5000/CRP7001 are composed of SS-CNP5000, SS-MSP5000
and SS-SRP5000.
TE
L 13942296513
Speaker section
• Front speaker (SS-MSP5000)
Speaker system
Speaker unit
Woofer:
Tweeter:
Rated Impedance
Dimensions (width/height/depth) (Approx.)
Mass (Approx.)
• Center speaker (SS-CNP5000)
Speaker system
Speaker unit
Woofer:
Tweeter:
Rated Impedance
Dimensions (width/height/depth) (Approx.)
Mass (Approx.)
• Surround/Surround back speaker
(SS-SRP5000)
Speaker system
Speaker unit
Woofer:
Rated Impedance
Dimensions (width/height/depth) (Approx.)
www
Mass (Approx.)
.
Sony Corporation
9-889-038-02
2008E05-1
Audio Business Group
©
2008.05
Published by Sony Techno Create Corporation
http://www.xiaoyu163.com
SA-WP5000/SS-CNP5000/CRP5000/
CRP7001/MSP5000/SRP5000
Photo: SS-CNP5000
• Subwoofer (SA-WP5000)
Speaker system
2-way, 3-driver, Bass
reflex, Magnetically
Speaker unit
shielded
RMS output
160 mm, cone type × 2
Input
25 mm, horn type
4 ohm
5)
Measured under the following conditions:
305 × 1,000 × 325 mm
Area code
(with foot)
E51, SP, MY, AUS
13.5 kg
MX
AR, TH
2-way, 3-driver, Bass
6)
Measured under the following conditions:
reflex, Magnetically
shielded
Area code
AR, TH
100 mm, cone type × 2
25 mm, horn type
Power requirements
4 ohm
Area code
SP, MY
515 × 175 × 225 mm
MX
(with foot)
E51
4.8 kg
AR, TH
AUS
Full range, Bass reflex
100 mm, cone type
4 ohm
174 × 220 × 166 mm
(with foot)
x
ao
u163
1.4 kg
y
i
http://www.xiaoyu163.com
2 9
8
Photo: SS-MSP5000
SS-CRP5000/CRP7001 COMPONENT MODEL NAME
Front speaker
Center speaker
Surround/Surround back speaker
Q Q
SPECIFICATIONS
3
6 7
1 3
1 5
Active subwoofer, Bass
reflex, Magnetically
shielded
250 mm, cone type
5)
200 W
6)
175 W
LINE IN (input pin jacks)
Power requirements
240 V AC, 50 Hz
127 V AC, 60 Hz
230 V AC, 50 Hz
Power requirements
220 V AC, 50 Hz
Power requirements
230 – 240 V AC, 50/60 Hz
127 V AC, 60 Hz
120/220/240 V AC,
50/60 Hz
220 – 230 V AC, 50/60 Hz
240 V AC, 50 Hz
co
.
9 4
2 8
E Model
Australian Model
Photo: SS-SRP5000
SS-CRP5000/CRP7001
SS-MSP5000
SS-CNP5000
SS-SRP5000
0 5
8
2 9
9 4
2 8
Power consumption 80 W
Dimensions (width/height/depth) (Approx.)
335 × 420 × 430 mm
(with foot)
Mass (Approx.)
11 kg
Design and specifications are subject to
change without notice.
• Abbreviation
AR
: Argentina model
AUS
: Australian model
E51
: Chilean and Peruvian models
MX
: Mexican model
MY
: Malaysia model
SP
: Singapore model
TH
: Thai model
ACTIVE SUBWOOFER
SS-CNP5000/MSP5000/SRP5000
m
SPEAKER SYSTEM
9 9
9 9
SA-WP5000
Advertisement
Table of Contents
Related Manuals for Sony SA-WP5000
Summary of Contents for Sony SA-WP5000
- Page 1 Photo: SA-WP5000 Photo: SS-CNP5000 Photo: SS-MSP5000 Photo: SS-SRP5000 SS-CRP5000/CRP7001 COMPONENT MODEL NAME • SA-WP5000 is the active subwoofer in HT-DDW5000/DDW7000. • SS-CNP5000 is the center speaker in HT-DDW5000/DDW7000. SS-CRP5000/CRP7001 • SS-MSP5000 is the front speaker in HT-DDW5000/DDW7000. Front speaker SS-MSP5000 •...
- Page 2 COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY. http://www.xiaoyu163.com...
- Page 3 3 7 63 1515 0 Note: Follow the disassembly procedure in the numerical order given. 1-1. FRONT PANEL ASSY (SA-WP5000) Insert the jig (J-2501-238-A) into a space and raise the front panel assy gradually. Note: When using a jig, please work so as not to injure front panel and speaker cabinet.
- Page 4 SA-WP5000/SS-CNP5000/CRP5000/CRP7001/MSP5000/SRP5000 3 7 63 1515 0 1-3. FRONT PANEL ASSY, DUCT PANEL ASSY (SS-MPS5000) Insert the jig (J-2501-238-A) into a space and raise the front panel assy gradually. Note: When using a jig, please work so as not to injure front panel and speaker cabinet.
- Page 5 : Mexican model : Malaysia model : Singapore model : Thai model 1 3 9 4 2 2 9 6 5 1 3 • IC Block Diagram – MAIN Board (SA-WP5000) – IC500 μPC1237C-A SWITCH FOR OVERLOAD LATCH/AUTOMATIC DETECTOR RESET...
- Page 6 SA-WP5000/SS-CNP5000/CRP5000/CRP7001/MSP5000/SRP5000 Ver. 1.1 3 7 6 3 1 5 1 5 0 2-1. PRINTED WIRING BOARDS - MAIN Section (SA-WP5000) - • See page 5 for Circuit Boards Location. • : Uses unleaded solder. • Semiconductor Location Ref. No. Location...
- Page 7 SA-WP5000/SS-CNP5000/CRP5000/CRP7001/MSP5000/SRP5000 Ver. 1.1 3 7 6 3 1 5 1 5 0 2-2. SCHEMATIC DIAGRAM - MAIN Section (SA-WP5000) - • See page 5 for IC Block Diagram. R209 R208 4.7k IC202(1/2) NJM4565D Q102 R202 C201 2SC2785TP-E C203 C204 0.22...
- Page 8 SA-WP5000/SS-CNP5000/CRP5000/CRP7001/MSP5000/SRP5000 Ver. 1.1 3 7 6 3 1 5 1 5 0 2-3. PRINTED WIRING BOARDS - POWER Section (SA-WP5000) - 2-4. SCHEMATIC DIAGRAM - POWER Section (SA-WP5000) - • See page 5 for Circuit Boards Location. • : Uses unleaded solder.
- Page 9 SA-WP5000/SS-CNP5000/CRP5000/CRP7001/MSP5000/SRP5000 Ver. 1.1 SECTION 3 EXPLODED VIEWS 3 7 63 1515 0 Note: • -XX and -X mean standardized parts, so • The mechanical parts with no reference • Abbreviation they may have some difference from the number in the exploded views are not sup- : Argentina model original one.
- Page 10 SA-WP5000/SS-CNP5000/CRP5000/CRP7001/MSP5000/SRP5000 Ver. 1.1 3 7 63 1515 0 3-2. SS-CNP5000 not supplied SP52 SP51 L 13942296513 not supplied SP53 not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark A-1441-039-A FRONT PANEL ASSY (for BLACK)
- Page 11 SA-WP5000/SS-CNP5000/CRP5000/CRP7001/MSP5000/SRP5000 Ver. 1.1 3 7 63 1515 0 3-3. SS-MPS5000 SP101 not supplied not supplied supplied SP103 L 13942296513 supplied not supplied SP102 supplied not supplied not supplied not supplied Ref. No. Part No. Description Remark Ref. No. Part No.
- Page 12 SA-WP5000/SS-CNP5000/CRP5000/CRP7001/MSP5000/SRP5000 Ver. 1.1 3 7 63 1515 0 3-4. SS-SRP5000 L 13942296513 u163 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark A-1439-443-A OVERALL ASSY (BLACK) (E51, SP, MY, TH, AUS) A-1543-248-A OVERALL ASSY (SILVER) (E51, MX, AR)
-
Page 13: Electrical Parts List
LED LNH301MPU0A1 (POWER) (E51) ************************************************************* C404 1-100-304-11 ELECT 3300uF (MX, SP, MY, AR, TH, AUS) A-1439-168-A MAIN BOARD, COMPLETE (E51) (SA-WP5000) A-1439-204-A MAIN BOARD, COMPLETE (SP, MY, TH) C404 1-127-814-11 ELECT (BLOCK) 3300uF (SA-WP5000) (E51) A-1439-205-A MAIN BOARD, COMPLETE (AUS) (SA-WP5000) - Page 14 < RESISTOR > RY301 1-755-170-11 RELAY (12V) R123 1-249-429-11 CARBON 1/4W ************************************************************* R124 1-249-429-11 CARBON 1/4W R202 1-247-831-91 CARBON 1/4W POWER TRANS BOARD (SA-WP5000) R205 1-247-871-91 CARBON 1/4W ******************* R206 1-249-439-11 CARBON 1/4W < CONNECTOR > R207 1-249-429-11 CARBON 1/4W R208 1-247-847-91 CARBON 4.7K...
- Page 15 < SWITCH > 0 S901 1-572-267-51 SWITCH, PUSH (AC POWER) (1 KEY) (POWER) ************************************************************* MISCELLANEOUS ************** 1-777-071-23 CORD, POWER (SA-WP5000: E51, SP, MY) 1-783-941-12 CORD, POWER (SA-WP5000: AR) 1-829-627-11 POWER-SUPPLY CORD (SA-WP5000: MX) 1-833-566-21 POWER-SUPPLY CORD (SA-WP5000: AUS) 1-834-288-21 POWER-SUPPLY CORD (SA-WP5000: TH)
- Page 16 SA-WP5000/SS-CNP5000/CRP5000/CRP7001/MSP5000/SRP5000 3 7 63 1515 0 REVISION HISTORY Checking the version allows you to jump to the revised page. Also, clicking the version at the top of the revised page allows you to jump to the next revised page.