GE B30 UR Series Instruction Manual page 580

G.1 CHANGE NOTES
Table G–7: MAJOR UPDATES FOR B30 MANUAL REVISION Y1 (Sheet 2 of 2)
PAGE PAGE CHANGE
(X2) (Y1)
5-15 5-15 Update
5-38 5-38 Delete
5- 5-38 Add
5- 5-38 Add
5- 5- Update
5-36 5- Delete
5- 5-42 Add
5- 5-49 Add
5- 5- Add
5- 5-108 Update
5-174 5-174 Delete
5- 5-192 Add
6-1 6-1 Update
6- 6-7 Add
6- 6-10 Add
7- 7-1 Add
7- 7-3 Add
7- 7-5 Add
7- 7-9 Add
8- 8-4 Add
A- A- Add
B-8 B-8 Update
C-23 C-23 Update
G
G-4
DESCRIPTION
Added 0 as valid number to section 5.2.4e Modbus Protocol section
Deleted Local Time Offset, Daylight Savings Time, DST (start/stop for month/day/hour) from Real
Time Clock menu
Added submenus Precision Time Protocol, SNTP Protocol, and Local Time and Synchronizing
Source settings to Real Time Clock menu
Added new Precision Time Protocol (1588) menu and setting descriptions
Updated Communication to Real Time Clock in SNTP protocol settings path. Moved SNTP
Protocol menu and settings descriptions to Real Time Clock subsection.
Deleted section k) SNTP Protocol and the settings descriptions
Added new section for Local Time menu settings and settings description
Added new PTP Fail menu item to the User-Programmable Self Tests menu
Added PTP Failure and CLOCK UNSYNCHRONIZED to Flexlogic Operands table
Added row for DeltaTime to Table 5-: FlexElement Base Units
Deleted section 5.8.5c Remote Devices: ID of Device for Receiving GSSE/GOOSE Messages,
meaning the Settings > Input/Outputs > Remote Devices settings
Added new CyberSentry security section and main menu, local passwords, session settings,
restore defaults, and supervisory subsections to Chapter 5
Updated Actual Values main menu to include Real Time Clock Synchronization submenu
Added new section for Real Time Clock synchronizing consisting of the menu of settings and the
setting descriptions
Added new section 6.2.19 Remaining Connection Status
Added Security command to the Commands main menu
Added Reboot Relay command and description to the Relay Maintenance menu items
Added Security menu and submenu commands and descriptions to the Command menu
Added to Minor self-test error message **Bad PTP Signal**
Added new section for CyberSentry software option with overview and security menu subsections
Added FlexAnalog item PTP–IRIG-B Delta to Table A-1: FlexAnalog Data Items
Updated Modbus memory map table to include port 0 for Modbus slave address, TCP, DNP,
HTTP, TFTP, MMS, and removed references to COM 1 RS485 port
Updated tables in sections C.6.3 ACSI Services Conformance Statement and C.7.1 Logical
Nodes Table
B30 Bus Differential System
APPENDIX G
GE Multilin