Attendant-Controlled Text Assignment - Panasonic DBS 824 Manual

Attendant Features
• On DSS consoles equipped with DSS keys, the indicator for an extension

Attendant-Controlled Text Assignment

(CPC-S and CPC-M)
Description
The attendant can assign text to extensions, system speed dial numbers, and
Call Waiting/OHVA text replies without using a DSS/72 or entering the
programming mode.
Text is assigned through the dial pad on the attendant phone.
Operation
To assign names to extensions:
1. Pick up the receiver or press the ON/OFF key.
2. Press PROG.
3. Dial #2.
4. Enter the extension's port number.
5. Press AUTO to backspace and erase the existing name.
6. Use the dialpad sequences shown in Table 2-1 on page 2-8 to enter letters
7. To store your entry, press HOLD.
To assign names to System Speed Dial numbers:
1. Pick up the receiver or press the ON/OFF key.
2. Press PROG.
Revised April 2000
that has Absence Message, Call Forwarding, or DND activated lights
green. This indicator goes off when the feature is canceled. The indicator
does not light for Permanent Call Forwarding.
and/or numbers.
Press FLASH after each letter.
Press CONF to switch between numbers and letters.
DBS 824-3.0/3.2-700

Attendant-Controlled Text Assignment

2-7