NEC express5800 A2010b User Manual page 397

Chapter 3 Setup
License Count: Shows total number of available processor cores on managed server. This items is displayed on
A2040b COPT model only.
Core Count
Shows number of enabled cores, spare cores, and disabled cores for each processor installed on managed
server.
Valid Core Count: Shows number of enabled cores used for managed server. If the server is in halt state, this
field shows the number of enabled cores at previous bootup.
Spare Core Count: Shows number of spare cores (not yet enabled).
Invalid Core Count: Shows number of cores disabled due to failure.
Administrator privilege is required to refer information.
Code Word Setting (A2040b COPT model only)
Use this page to enter codeword used for enabling the spare core. The disabled cores can be enabled by this
operation. The core is enabled according to Core Assign Mode, at the timing specified in Core Configuration
Mode. Administrator privilege is required to use this feature.
Buttons
① [Apply] button
Apply the entered codeword and return to List page.
② [Cancel] button
Return to List page without applying the entered codeword.
③ [Reload] button
Press the [Reload] button to display the latest information.
Important
•
This setting is supported only on A2040b model, and not supported on any other
model.
•
Refer to "Express5800/A2040b Capacity Optimization (COPT) User's Guide" for
details of operation procedure.
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
7. Using Remote Management



397