Chapter 3 Setup
Item name
Management
ESMPRO
Software
Management
(*8)
Authentication
key (*9)
Redirection
(LAN)(*9)
(*1) Factory-set value.
(*2) SEL is cleared when changed from "Overwrite oldest SEL" to other setting, or from other setting to
"Overwrite oldest SEL".
(*3) Use this setting when NEC ESMPRO Agent is used.
(*4) At least one interface must be enabled to configure operation log.
(*5) If "Power Save" in System BIOS is set to Enabled, this item is set to "Power On".
(*6) Not displayed when AC-Link is set to "Stay Off". Specify the delay time from AC power-on to DC
power-on.
(*7) Enable or disable alert from BMC. When "Disable" is selected, SNMP alert is not sent from BMC.
(*8) Select "Enable" to let NEC ESMPRO Manager manage BMC directly.
(*9) Displayed only when "Enable" is selected for ESMPRO Management.
(*10) Up to 16 characters of 1-byte alphanumeric can be accepted.
368
Description
Enable or disable
the feature to
monitor or manage
the server from
NEC ESMPRO
Manager.
If Enabled, NEC
ESMPRO
Manager can
remotely monitor
or manage the
server.
When ESMPRO
Management is
enabled, specify
authentication key
used to access
BMC,
Enable or disable
the feature to
display Serial Over
Lan (SOL) screen
from NEC
ESMPRO
Manager.
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
Setup value
Enable/Disable
Authentication key when
managed by NEC ESMPRO
Manager (*10)
Enable/Disable
7. Using Remote Management
Default setting(*1)
Enable
guest
Enable