Configuring Gts By Using The Non-Mqc Approach - HP MSR4080 Configuration Manual

Step
3. Configure match
criteria.
4. Return to system view.
5. Create a behavior and
enter behavior view.
6. Configure a GTS
action.
7. Return to system view.
8. Create a QoS policy
and enter policy view.
9. Associate the class with
the traffic behavior in
the QoS policy.
10. Return to system view.
11. Apply the QoS policy.
12. (Optional.) Display
traffic behavior
configuration.

Configuring GTS by using the non-MQC approach

You can configure the following types of GTS when using the non-MQC approach:
ACL-based GTS—Configures GTS parameters for traffic matching a specific ACL. By specifying
•
multiple ACLs, you can set GTS parameters for traffic of different traffic classes.
• GTS for all traffic—Configures GTS parameters for all traffic.
Configuring ACL-based GTS
Step
1. Enter system view.
2. Enter interface view.
Command
if-match [ not ] match-criteria
quit
traffic behavior behavior-name
•
In absolute value:
gts cir committed-information-rate [ cbs
committed-burst-size [ ebs
excess-burst-size ] ] [ queue-length
queue-length ]
•
In percentage:
gts percent cir cir-percent [ cbs cbs-time
[ ebs ebs-time ] ] [ queue-length
queue-length ]
quit
qos policy policy-name
classifier classifier-name behavior
behavior-name
quit
•
Applying the QoS policy to an interface or
PVC
•
Applying the QoS policy to the control
plane
display qos policy user-defined
[ policy-name ]
Command
system-view
interface interface-type interface-number
41
Remarks
By default, no match criterion
is configured.
For configurable match
criteria, see the if-match
command in ACL and QoS
Command Reference.
N/A
By default, no behavior is
created.
By default, no GTS action is
configured.
N/A
By default, no QoS policy is
created.
By default, a traffic class is not
associated with a traffic
beha or. vi
N/A
By default, a QoS policy is not
applied.
Choose one of the application
destinations as needed.
Available in any view.
Remarks
N/A
N/A