Recalling A Preset Job Stored In Memory - Panasonic DP-C266 Operating Instructions Manual

Recalling a Preset Job Stored in Memory

The specific copy job will be done by recalling the registered preset jobs.
Refer to Storing a Job in Memory (see page 36).
1
Place original(s).
Refer to Placing Originals (see page 6).
2
Press the Copy key if the machine is
set to other function mode.
3
Select "Preset Jobs".
4
Select a stored job.
Job buttons without names, indicate that
jobs are not registered.
If the Confirmation screen "Ready for M 1
Memory Copy" is displayed, select "Close".
5
To confirm the job settings, select
"Confirm Settings", and then select
"Close".
To change the setting, refer to Confirming/
Editing the Selected Copy Features (see
page 35).
6
Press the Start key.
37