ABB Freelance 2000 Manual page 105

Section D
Messages:
S
ET
After pressing the F2 key in an input field for a bit variable with messages, an additional dialog
box appears. The choice made there determines which message status will be used for
evaluation.
<active messages> From the set of configured messages, those whose message state is
<all messages>
Gross Automation, 1725 South Johnson Road, New Berlin, WI 53146, www.ssacsales.com, 800-349-5827
A set of message points is used to define a binary process state. If the
check box is selected, the S
'<all messages>' is displayed.
Choose a set of message points from among all existing message points
in the project.
tu0503us.bmp
'active' are evaluated.
From the set of configured messages, those whose message state is not
'inactive, acknowledged' are not evaluated, i.e. all active messages and
all the inactive, unacknowledged messages.
button becomes available, and the text
ET
Graphic Display
D-31