ABB Freelance 2000 Manual page 101

Section D
Bit allocation tab
A dynamic object may have up to 3 dynamic process states assigned to it. These binary values
are linked in DigiVis bit-wise, so that the object can be displayed in up to 8 states.
There are two options for defining a binary process state:
• any process value whose data type is BOOL
• existing messages
Display tab
Up to 8 object display states are defined for DigiVis, corresponding to the binary process
values.
General tab
Static objects can be configured specifically as foreground or background objects for the
dynamic object.
When a dynamic object in DigiVis is clicked on, this can also be used to trigger an action, e.g. a
change of display or the writing of a process variable.
Positions tab
A graphic symbol can be either moved continuously across an area in the graphic display or
displayed at up to 8 chosen positions in the graphic display. This area or these positions are
defined on this tab.
Gross Automation, 1725 South Johnson Road, New Berlin, WI 53146, www.ssacsales.com, 800-349-5827
Graphic Display
D-27