Hitachi 55HZT66U Instruction Manual page 40

start A.P.S. (Auto Programming System)
1
• When the TV is operated for the first time, installation wizard will guide you
through the process. First, language selection screen will be displayed.
• Use "up" or "down" buttons to select your language and press OK button
to set selected language and continue.
2
• After selecting the language, "First Time Installation" screen will be
displayed, requiring you to set Country, Search Type, Teletext Language
and Scan Encrypted options.
• By pressing "left" or "right" button, select the country you want to set press
"down" button to highlight Search Type option. Use Left or Right button to
set the desired Search Type. Available search types are digital only,
analogue TV only and full. When set, press Down button to highlight
Teletext Language. Use "left" or "right" button to select desired Teletext
Language.
• Press "down" button after setting Teletext Language option. Scan
Encrypted Channels will be then highlighted. You can set Scan Encrypted
Channels as Yes if you want to scan coded stations.
• Press OK button on the remote control to continue and the next menu will
be displayed on the screen.
3
• You can activate Store mode option by using "left" or "right" button. If Store
Mode is selected, your TV's settings will be configured for store
environment. For home use select Home Mode. A confirmation screen will
be displayed if Store Mode is selected. Select YES and press the OK button
to proceed.
• This option will be available in Other Settings menu and can be turned
off/on later.
4
A message will be displayed asking wheter you want to do network settings.
Select Yes and the Network Settings menu will be displayed. Please refer
to Connectivity section to configure a wired or a wireless connection. After
the settings are completed press OK button to continue.
5
• Afterwards Digital Search Type screen will be displayed.
Please select Aerial option and press OK button to continue, a message
asking for the starting process appears on the screen. To continue please
select YES and press OK. The television will search for avai̇ l able
broadcasts. To cancel operation, select NO and press OK.
Note: As the Cable feature is not supported in the UK, please ensure that you
select Aerial during the First Time Installation. If you mistakenly select Cable,
please repeat the First Time Installation (which can be selected from the
tuning menu) and select Aerial.
important note.
Once the TV has found all your local stations, they are then automatically
assigned a programme number and name, if available from the broadcast.