Operator Functions And Totalizer Set Up - ABB COMMANDER 150 User Manual

...4 CONFIGURATION MODE
4.3.3 Operator Functions and Totalizer Set Up – Fig. 4.6
J 0000
K 0000
L 0000
n 0000
P 0000
24
'JKLN' Settings
The first character (
to be changed. The current setting is indicated by a
flashing letter. Parameter options are shown in Fig. 4.6.
= Totalizer set-up
J
K = No. of decimal places for totalizer
= Operator level frame enable
L
n = Operator level functions enable/disable
Note. For custom settings contact the local
distributor.
Continued on page 26.
, , or ) identifies the parameter
J K L n