ABB COMMANDER 150 User Manual page 14

...2 OPERATOR MODE
...2.4 Operating Page – Maths Functions (Level 1)
H150. 2
rSt-n
L130. 8
rSt-n
CodE
------
LEVEL1
•1 This frame can be disabled – see Section 4.3.3.
The Max. and Min. values are reset automatically on power-up and can also be
reset from a digital input – see Section 4.3.4.
The reset reset function in this frame can be disabled – see Section 4.3.3.
12
Maximum Value
•1
This is the maximum value of the process variable since
the maximum was reset.
To reset the maximum value, select
the key.
Minimum Value
•1
This is the minimum value of the process variable since
the minimum was reset.
To reset the minimum value, select
the key.
Security Code
Enter the correct code to access the setup level.
Level 1
Note. To select to this frame from anywhere in
this page, press the
– reset
rSt-Y
rSt-n – do not reset
– reset
rSt-Y
rSt-n – do not reset
[0 to 9999]
key for a few seconds.
rSt-Y then press
rSt-Y then press