Table of Contents
Advertisement
1 6 | Bosch 3H/2C Touch-Technology Thermostat
6.5 Setting the program schedule
The thermostat has four periods (WAKE, LEAVE, RETURN, SLEEP) that are
customizable for each day of the week. Each period will have a start time, heat
temperature, and cool temperature. The thermostat monitors the day and time, while
maintaining the specifi c conditions you have chosen for each period in your program.
Setting the program schedule:
1.
Press
, then press
until EDIT is displayed.
2.
Press
to enter Program Schedule.
3.
The day of the week fl ashes. Use the
You can select the days individually, or if you keep going, there is an option
for MON-FRI, MON-SUN or SAT-SUN.
4.
Press
to continue.
5.
The period (WAKE, LEAVE, RETURN, SLEEP) begins fl ashing. Use the
to select the desired period.
6.
Press
to continue.
7.
Hour fl ashes. Use the
or
period to begin.
8.
Press
to continue.
9.
The minutes fl ash. Use the
current period to begin.
10.
Press
to continue.
11.
The HEAT temperature fl ashes. Use the
temperature.
12.
Press
to continue.
13.
The COOL temperature fl ashes. Use the
temperature.
14.
Press
to continue.
15.
Continue to set your entire schedule.
16.
Press
to exit.
Data subject to change
or
to select the day of the week.
to select the hour when you want the current
or
to select the minutes when you want the
or
to set the desired heat
or
to set the desired cool
6.6 View screen options
1.
Press
, then press
then press
.
2.
Press
to advance to the next screen.
3.
Press
to go to previous screen.
These screens are visible when the thermostat is locked or unlocked.
View fault Screen
or
VIEW
Figure 31
View month, day, and year
VIEW
Figure 32
View program schedule settings
—
OFF shows when schedule is off.
—
SETTINGS show when schedule is on.
Mon
VIEW
Figure 33
Installation, Operation & Application Manual
repeatedly until the
option displays
Month
Day
Month
Year
Day
SCHEDULE
SLEEP
08.2016 | Bosch Thermotechnology Corp.
Advertisement
Table of Contents
