D-Link DIR-879 User Manual page 44

Section 4 - Installation - Access Point
4. Connect an Ethernet cable from your uplink network to the INTERNET port on the back of the DIR-879, press the power
button, and wait approximately one minute until the LED indicator on the front of the device changes from orange to
solid white.
Internet
5. Connect wired devices to the LAN ports on your DIR-879. Connect wireless devices to the Wi-Fi network printed on
the included Wi-Fi Configuration Card. You can also find the Wi-Fi network names and passwords printed on the label
attached to the bottom your DIR-879.
Internet Broadband Connection Device
(e.g. DSL/Cable Modem)
Congratulations, your device has been successfully configured!
Refer to Configuration - Extender Mode on page 97 for information on changing the default wireless network names
or passwords.
D-Link DIR-879 User Manual
Broadband Connection Device
(e.g. DSL/Cable Modem)
Existing Router
Existing Router
DIR-879
DIR-879
Wi-Fi Configuration Note
40