2.1 PT Programming
2.1
PT Programming
2.1.1
Programming Instructions
Required Telephone/Extension
PBX settings can be customized through system programming by using a proprietary telephone (PT)
with a display, such as the KX-T7737. To access system programming, the Class of Service (COS)
assigned to the PT's extension must be programmed to allow system programming, or the PT must
be connected to the lowest numbered port on the card installed in the lowest numbered slot.
Only one system programming session can be performed at a time. This means that one user can
access system programming at a time, whether through a PT or PC.
For a list of characters that can be entered during system programming, see Section 1.1.3 Entering
Characters.
Buttons and Functions
12
PT Programming Manual
Fixed Buttons
SP-PHONE
SP
FLASH/RECALL
Function
PREVIOUS
NEXT
(Page up)
(Page down)
SELECT
PROGRAM
STORE
END
CLEAR
FLASH
SECRET