Panasonic DX-600 Network Fax Manual page 81

Fax Parameter Table
No. Parameter
047 REMOTE RECEPTION
48 TELEPHONE LINE
49 PSTN ACCESS CODE
051 REMOTE
DIAGNOSTIC
052 DIAGNOSTIC
PASSWORD
053 SUB-ADDRESS
PASSWORD
054 FAX FORWARD
056 COVER SHEET
57 COUNTRY CODE
58 LANGUAGE
64 CHANGE KEYBOARD
065 PRINT COLLATION
082 QUICK MEMORY XMT
099 MEMORY SIZE
(Flash Memory)
140 LAN RELAY XMT
REQUEST
RELAY XMT
142
(a.k.a. LAN RELAY
STATION on UF-770i)
Continued on the next page...
Setting
Setting
Number
1 Invalid Selecting whether or not the machine accepts remote
reception command. (See page 128)
2 Valid
1 PSTN Selecting the type of line connected.
2 PBX
(----) Setting PSTN Access Code. (max. 4 digits)
1 Invalid Selecting whether or not the machine accepts to update
the firmware or Remote Diagnostics from the remote
2 Valid
station. Please ask your Panasonic Authorized Dealer for
details.
(----) Setting the password for Remote Diagnostic Mode.
Please ask your Panasonic Authorized Dealer for details.
(----) Setting a 20-digit password for secured sub-address
communication.
1 Invalid Selecting whether the machine performs Fax Forwarding
to the specified destination. (See page 177)
2 Valid
1 Off Setting the home position of the Cover Sheet parameter in
the Select Mode. (See page 173)
2 On
Selecting the country code when installing your machine.
Selecting the language to be shown on the display and
reports.
1 DEFAULT Selecting the type of the Directory Sheet Cover. Change
the setting to CHANGE if using the Directory Sheet Cover
2 CHANGE
included with the accessory box.
1 Invalid Selecting whether the machine prints out documents in
sequence. (See page 135)
2 Valid
1 Invalid Selecting whether the machine performs Quick Memory
Transmission. (See page 107 to 109)
2 Valid
Invalid : Stores all documents into memory first before
Valid
- - Displays the amount of base and optional memory
installed.
(Base Memory + Optional Memory)
1 Invalid Selecting whether the machine performs LAN Relay XMT
Request.
2 Valid
1 Invalid Selecting whether the machine accepts and performs G3
relayed transmission. (Relay Station Functions)
2 Valid
Customizing Your Machine
Comments
dialling the telephone number.
: Starts dialling the telephone number immediately
after storing the first page.
81