Fax / Tel Auto Switching Mode - Panasonic DX-600 Network Fax Manual

Fax / Tel Auto Switching Mode

When your machine is set to this mode, your machine will switch to document reception or voice
communication automatically.
Setting the Fax / Tel Auto Switching Mode
1
Change Fax Parameter No. 17 (RECEIVE MODE) to 3: Fax / Tel SW.
(See page 79)
Operation of Fax / Tel Auto Switching Mode
If it is a Fax call,
1
Your machine will answer the call when a call is received,
then distinguish whether it is a voice or fax call.
2
Your machine begins to receive the documents.
If it is a Voice call,
1
Your machine will answer the call when a call is received,
then distinguish whether it is a voice or fax call.
2
Your machine begins to signal (ringing) through the
machine's speaker for your attention. (See Note 1)
3
Lift the handset of the External Telephone and press
STOP
4
Begin the
1. The length of time the machine signals can be changed by Fax Parameter No.18 (OP CALL
NOTE
TIMER). (See page 79)
2. To adjust the Ringer Volume refer to page 44.
Receiving Documents via Telephone Line
.
conversation.
129