D-Link DIR-822 User Manual page 157

DIR-822 AC1200 Wi-Fi Router
User Manual
Figure 122. The page for changing the settings of the router's port.
On the opened page, specify the needed parameters:
Parameter
Speed
Port WAN / LAN
Data transfer mode.
Select the Auto value to enable autonegotiation.
selected, the Autonegotiation modes and Flow control
sections are displayed.
Select the 10M-Half, 10M-Full, 100M-Half, or 100M-Full value
to manually configure speed and duplex mode for the selected port:
10M-Half: Data transfer in just
•
can be either sent or
of up to 10Mbps.
10M-Full:
Data transfer in two directions simultaneously
•
(data can be sent and received at the same time)
maximum possible
100M-Half: Data transfer in just
•
can be either sent or
of up to 100Mbps.
Page 157 of 212
Configuring via Web-based Interface
Description
one direction at a time
received) at the maximum possible
rate of up to 10Mbps.
one direction at a time
received) at the maximum possible
When this value is
(data
rate
at the
(data
rate