Creating Pptp/L2Tp + Static Ip Or Pptp/L2Tp + Dynamic Ip Wan Connection - D-Link DIR-822 User Manual

DIR-822 AC1200 Wi-Fi Router
User Manual

Creating PPTP/L2TP + Static IP or PPTP/L2TP + Dynamic IP WAN Connection

To create a connection of the PPTP + Static IP, L2TP + Static IP, PPTP + Dynamic IP, or L2TP +
Dynamic IP type, click the Add button on the Net / WAN page. On the opened page, select the
relevant value from the Connection Type drop-down list and specify the needed values.
Figure 94. The page for creating a new PPTP + Static IP connection. The General settings section.
Parameter
Interface
Name
Enable
Direction
General settings
A physical or virtual interface to which the new connection will be
assigned.
A name for connection for easier identification.
Select the checkbox to enable the connection.
The direction of this connection.
Page 111 of 212
Configuring via Web-based Interface
Description