Using The Quick Connect Feature - GE 345 Quick Start Manual

SOFTWARE SETUP
Using the Quick
Connect feature
50
9. Click OK when the relay order code has been received. The new device will be added
to the Site List window (or Online window) located in the top left corner of the main
EnerVista SR3 Setup window.
The 345 Site Device has now been configured for USB communications. Proceed to
Connecting to the Relay below, to begin communications.
The Quick Connect button can be used to establish a fast connection through the front
panel USB port of a 345 relay, or through the Ethernet port. The following window will
appear when the QuickConnect button is pressed:
As indicated by the window, the "Quick Connect" feature can quickly connect the EnerVista
SR3 Setup software to a 345 front port if the USB is selected in the interface drop-down list.
Select "345 Relay" and press the Connect button. Ethernet can also be used as the
interface for Quick Connect as shown above.
When connected, a new Site called "Quick Connect" will appear in the Site List window.
345 TRANSFORMER PROTECTION SYSTEM – QUICKSTART GUIDE
CHAPTER 3: INTERFACES