Installing Abb Control Builder Ac500; Installing Ps553-Drives Libraries - ABB ACS355 Application Manual

2201 ACC/DEC 1/2 SEL
3018 COMM FAULT FUNC
5302 EFB STATION ID
5303 EFB BAUD RATE
5304 EFB PARITY
5305 EFB CTRL PROFILE
5310 EFB PAR 10
5311 EFB PAR 11
5312 EFB PAR 12
9802 COMM PROT SEL

Installing ABB Control Builder AC500

This section describes how to install the Control Builder and a driver for the TK503/504
cable.
Note: For more information on the cable driver installation, see
\CD_AC500\Driver\TK503_TK504\TK503_TK504_Driver_Installation.pdf on the
installation CD.
1. Insert the installation CD of ABB PS501 Control Builder.
The CD automatically starts the installation program. A new window opens.
2. Click Installation PS501.
The installation begins.
3. Follow the steps in the installation wizard.
Once the installation is finished, you return to the main menu.
4. Click Tools.
5. Click TK503 + TK504 cable driver.
The TK503_TK504 programming cable Driver Installer window opens.
6. Click Install.
The installation begins.

Installing PS553-DRIVES libraries

Note: ABB PS501 Control Builder must be installed first.
1. Remove the SD memory card from the AC500-eCo and insert it in
the memory card reader of the PC.
2. In the root directory of the SD memory card, open setup.exe.
3. Follow the steps of the setup wizard.
Libraries, examples and the online help are copied to the hard drive of
the PC.
NOT SEL (0)
FAULT (1)
2
19.2 kbit/s (192)
8 NONE 1 (1)
ABB DRV FULL (2)
101
303
305
STD MODBUS (1)
Configuration 11
2