Panasonic KX-TDA50 Programming Manual page 611

Maintenance Console Location
2.16.3 [10-3] DID Table (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
2.8.8 [2-6-1] Numbering Plan—Main
2.16.4 [10-3] DID Table—Automatic Registration (KX-TDA100/KX-TDA200/KX-TDA600 only)
Feature Manual References
1.4.5 DID (Direct Inward Dialing)
1.13.12 PRIVATE NETWORK FEATURES
Tenant Number
Specifies the tenant number, to determine the Time Table by which calls are distributed depending
on the time of day.
Default
1
Value Range
1–8
Maintenance Console Location
2.16.3 [10-3] DID Table (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
2.8.5 [2-4] Week Table
Feature Manual References
1.4.5 DID (Direct Inward Dialing)
VM Trunk Group No.
Specifies the number of the VPS trunk group sent to the VPS when the DID destination is the floating
extension number of a VM (DPT) Group.
The VPS trunk group number is used to allow the VPS to send the applicable greeting message to
the caller.
Default
1
Value Range
1–48
Maintenance Console Location
2.16.3 [10-3] DID Table (KX-TDA100/KX-TDA200/KX-TDA600 only)
2.16 [10] CO & Incoming Call
PC Programming Manual 611