Panasonic KX-TDA50 Programming Manual page 541

A C
B
A B , = 100–1300 ms,
Option: The tone pattern that the PBX receives is optional as specified in DISA Cyclic Tone Option
on this screen.
Maintenance Console Location
2.11.3 [5-3-1] Voice Message—DISA System
Programming Manual References
2.7.24 [1-1] Slot—OPB (KX-TDA100/KX-TDA200/KX-TDA600 only)
Feature Manual References
None
DISA Cyclic Tone Option—Tone On Maximum Time
Specifies the maximum duration of the cyclic tone that will be recognized by the PBX. When the tone
sent from the telephone company is shorter than the value set here, the PBX recognizes it as a tone-
on.
To change DISA Cyclic Tone Option, follow the steps below:
1.
Change DISA Cyclic Tone Option.
2.
Set the status of the MSG card (KX-TDA50) or OPB3 card (KX-TDA100/KX-TDA200/KX-
TDA600) card to "OUS", then "INS".
Default
600 ms
Value Range
100 + 10 × n (n=1–390) ms
Maintenance Console Location
2.11.3 [5-3-1] Voice Message—DISA System
Programming Manual References
2.7.24 [1-1] Slot—OPB (KX-TDA100/KX-TDA200/KX-TDA600 only)
Feature Manual References
None
DISA Cyclic Tone Option—Tone Off Maximum Time
Specifies the maximum time that the PBX waits for a cyclic tone to be sent from the telephone
company before recognising it as a tone-off. When no tone is detected within the time set here, the
PBX recognizes it as a tone-off.
To change DISA Cyclic Tone Option, follow the steps below:
C
C
D D D
= A 90 ms, =
C D
90 ms
B
2.11 [5] Optional Device
PC Programming Manual 541