Toro Greensmaster 3150 Service Manual page 193

Specifications
Height- -of- -Cut : 3/32 (0.094) in. to 3/4 (0.75) in.
Clip Frequency and Optimum Height of Cut Range:
.
Model No
04460 (8 blade reel)
04465 (11 blade reel)
Roller Adjustment:
Front: Micrometer hand adjustment with bolted clamp
lock (1 turn = 0.025 in. height of cut change).
Rear: Roller brackets allow adjustment for different
heights of cut. Screw adjustment for leveling.
Bedknife to Reel Adjustment: Bedknife adjusts
against reel with positive adjustment control knob lo-
cated at center of bedbar. Adjustment knob contains
detent with .001 in. movement of bedknife for each in-
dexed position.
Groomer Reel Depth: 0.18 in. max. below height of cut.
1. Lift bail
2. Height of cut adjustment knob (2)
3. Height of cut adjustment locknut (2)
4. Pull rod studs (2)
Greensmaster 3150
Optimum Height
Clip (max.) of Cut Range
0.25 in. 3/16 to 5/16 in.
0.18 in. 1/8 to 7/32 in.
5. Grass shield
6. Reel
7. Groomer micro adjust locknut (2)
8. Bedknife adjusting knob
Groomer Reel Raised Height: 5/16 (0.312) in. from
grooming reel height/depth adjustment.
Reel Speed: 1940 rpm (engine speed 2800 rpm).
Groomer Reel Speed: 3200 rpm.
Bedknife Screw Torque: 200 to 250 in-lb.
Reel Splined Drive Nut Torque: 40 to 60 ft-lbs.
Reel Bearing Rolling Torque: 7 in-lb. max.
Front or Rear Roller Run-Out: 0.014 in. max.
Groomer Reel Drive Belt Tension: 1/4 in. deflection
when a force of 5 - 10 lb. is applied midway between
drive pulley and driven pulley.
Clutch Adapter Torque: 170 to 210 in-lb.
Clutch Assembly Locknut Torque: 140 in-lb. (remov-
ing all end play).
Page 9 - 3
9. Groomer reel
10. Groomer clutch snubber
11. Clutch engage/disengage knob
12. Groomer quick up/down lever
Specifications