Miele G 7881 Installation And Operating Instructions Manual page 68

Installation
How to position and secure the
machine
To ensure stability the
washer-disinfector must first be aligned
and then secured to the countertop.
^ Open the door.
^ Screw the washer-disinfector to the
countertop through the left and right
holes in the front trim.
^ Do NOT use silicone sealant to seal
the gaps between the
washer-disinfector and any
neighboring units as this would
hinder ventilation to the circulation
pump.
How to protect the countertop
Depending on your requirements for
installation, contact Miele Customer
Service for countertop protection kits.
The underside of the countertop is
protected from steam damage by a
stainless steel plate.
68
Decorative frame and decorative
panel (Option)
The front of the washer-disinfector can
be fitted with a decorative panel to
match the cabinetry.
Decorative panels should only be
exchanged in accordance with all
applicable safety regulations.
Decorative panel dimensions:
Outer door panel H 442 / W 586 mm
Mounting plate
D 1.2 mm thick
Toe kick service panel H 117 mm /
W 586 mm / D 1.2 mm thick
H 117 / W 586 mm /