Programmable functions
DOS 1 dispensing (detergent)
Setting the liquid detergent dispensing concentration
The dispensing concentration only needs to be set for liquid detergents. Set
the concentration according to the detergent manufacturer's
recommendations. Do NOT change the setting if you are using powder
detergent in the door dispenser.
Step
^ Activate the programming mode as
per page 35.
^ Press the "Drying" 0 button until E02
appears in the display.
^ Turn the program selector to the
"Wash" program.
Without DOS Module?
With DOS Module?
^ Press or hold down the "Display" ß
button until the desired value appears
in the display, e.g., 0.50.
^ Save to memory and exit programming
mode as per page 35.
Dispensing concentration setting:
Setting
.10
.20
.30
.40
.50
* Recommended dosage for neodisher FA
40
Display / Result
E02
10 = 10 sec dispensing time
1.00 = 1.0 % dispensing concentration
0.50
The dispensing time / dispensing
concentration is now set.
Dosage
20 ml
30 ml
40 ml
50 ml*
60 ml
Setting
.60
.70
.80
.90
1.0
Dosage
70 ml
80 ml
90 ml
100 ml
110 ml