Samsung OfficeServ 100 System Administration Manual page 15

Samsung OfficeServ 100
4. Press the SPEAKER key.
5. Dial the 3-digit program (MMC) code you want to
access (e.g. 201)
OR
Scroll through MMC codes using the VOLUME keys
and press the SPEAKER key to select.
Follow the instructions for your selected program. Some programs are described in this section. For
other programs, refer to the Samsung OfficeServ 100 Programming Guide.
Note: You must begin programming within 30 seconds of opening a program. Once you are in programming
mode, any delay of more than 30 seconds between keystrokes will cause the system to automatically close
programming. (The system timer can, however, be changed to allow more or less time before programming
mode is closed. Ask your dealer or the system installer for advice.)
System Administration Guide
201: CUS. PASSCODE
SELECT PROG ID
11