Setting up the Network Configuration
2Network Configuration
Follow the procedure below if your network is not configured with the DHCP server, and the TCP/IP
parameters must be set up manually.
• IP Address
• Subnet Mask
• Default Gateway
• DNS Server
Before executing the procedures described below, make sure the Printer On Line LED is lit.
1
Press the Function key.
Printer On Line LED
Wait until the Printer On Line LED lights up
before pressing the Function key.
2
Select "Network Settings".
4
3
Function key
4
Enter the Key Operator password (8
digits), and then select "OK".
1
The default password is "00000000".
To change the password, select "85 Key
Operator Password" in the General
Settings (Key Operator Mode), and then
enter the new password.
To correct a mistake, select "Back Space" to
delete, and enter the correct character.
Select "01 General".
2