Panasonic DP-C406 Operating Instructions Manual page 19

10
Select "04 SMTP AUTH Password"
and enter the SMTP AUTH Password
using the Keyboard, and then select
"OK". (Up to 30 characters)
11
Select "06 POP Server", and enter the
POP Server Name or IP Address
using the Keyboard, and then select
"OK". (Up to 60 characters)
1
.If you select "No" for DNS Server in step 11
on page 6, enter the POP Server IP Address
instead of the POP Server Name.
12
Enter the Port Number, and then
select "OK".
1
1 2
2
2
13
Select "07 POP User Name" and
enter the POP User Name using the
Keyboard, and then select "OK".
(Up to 40 characters)
14
Select "08 POP Password" and enter
the POP Password using the
Keyboard, and then select "OK". (Up
to 30 characters)
15
Select "05 POP before SMTP", and
select "Off" or "On", and then select
"OK".
1
"POP before SMTP" is one of the User
Authentication methods at the time of
transmitting an Email. It is the system which
gives permission for the use of the SMTP
server by accessing the specified POP
server before the transmission.
1 2
1 2
2
19